SHEETROCK® MH Brand Setting- Type Joint Compound - TUF SET™ High Early Strength (HES)

• A chemically hardening (setting-type) compound for treating wallboard joints in the manufactured housing industry. Has the lowest water demand among USG compounds for the highest joint strength.
• For use on wall and ceiling joints whenever rapid development of high strength is a manufacturing necessity.
• Sets quickly for fast joint finishing, allowing rapid movement along the assembly line.
• Reduced water demand means quicker drying time.
• Meets or exceeds ASTM C475.
• Available in 15, 20, 30, 45, 60 and 90 minute set times; 25 lb. bag.
• See publication MH1225 for additional information.

• A high strength, chemically hardening (setting-type) compound designed specifically for the Manufactured Housing Industry.
• For use on wall and ceiling joints of manufactured homes; particularly good for embedding tape and for first coats.
• Sets quickly for rapid joint finishing and decorating.
• Meets or exceeds ASTM C475.
• Available in 15, 20, 30, 45, 60, 90 and 210 minute set times; 25 lb. bag.
• See publication MH1179 for additional information.

• A lightweight, chemically hardening (setting-type), east-to-sand joint compound.
• For use on wall and ceiling joints, whenever sanding is required. Ideal for second and third coats.
• Weighs 25% less than conventional setting-type compounds.
• Offers a unique humidity resistance, exceptional bond, and low shrinkage.
• Provides check-crack resistance in heavy fills.
• Meets or exceeds ASTM C475.
• Available in 20, 45, 90, 210 and 300 minute set times; 18 lb. bag. EASY SAND 90 also available in 4 lb. box.
• See publication J621 for additional information.

• A versatile, ready-mixed, drying-type joint compound.
• Used for taping, topping, and texturing.
• Ready-mixed formulation ensures product uniformity.
• Easy to apply; offers good slip and excellent bond.
• Meets or exceeds ASTM C475.
• Available in 1 qt. plastic container; 12 lb., 42 lb. and 61.7 lb. plastic pails; and 61.7 lb., 50 lb., and 3.59 gal. cartons.
• See publication J60A for additional information.

• A lightweight, easy-to-sand, ready-mixed drying-type joint compound.
• For taping, topping and texturing.
• Weights up to 35% less than conventional compounds.
• Requires only two coats over metal beads and trims, saving time and labor.
• Meets or exceeds ASTM C475.
• Available in 1 gal. and 4.5 gal. pails; 4.5 gal., 3.5 gal. and 3.59 gal. cartons.
• See publication J498A for additional information.

• A low-shrinkage, easily applied, sandable, ready-mixed drying-type joint compound.
• For topping and texturing.
• Smooth, creamy consistency; excellent slip; easy workability.
• Factory mixed for product uniformity.
• Low shrinkage for a finer finish.
• Meets or exceeds ASTM C475.
• Available in 1 qt. plastic container; 12 lb., 42 lb., and 61.7 lb. plastic pails; and 61.7 lb., 50 lb., and 3.59 gal. cartons.
• See publication J60A for additional information.